DTH Hammer Bit
DOWN THE HOLE drilling is a kind of big diameter borehole drilling by extending the impacting power to the bottom of the hole. With high straightness, clean hole wall, good rigidity of drill pipe and hammer, without high axial thrust, no restriction of drilling depth, and low cost
- Horizontal Directional Drilling (HDD)
- Water Well Drilling
- Construction and Pile Drilling
- Exploration Drilling
- Geotechnical and Environmental
- Mining Drill and Blast
- Mining Exploration & Probing
- Geophysics
Every DTH hammer bit is built in factories. All components are precision-manufactured using high-quality raw materials and undergo proprietary heat-treatment processes at our own facilities to guarantee durability and quality. We also keep improvement ensures innovating from our customers at their drill sites.
The range of 3'– 32' hammers bits can be used for drilling in mining, quarrying, exploration, water-well, geothermal, and construction/geotechnical projects.
DTH Bit Face Shape Selection
VD DRILL DTH bits come in FIVE different standard bit head/face designs, and with a variety of tungsten carbide button shapes to suit a wide variety of drilling conditions. Additional specific bit face designs, shanks and custom options are available on request.
Drop Center
For high penetration rates and minimum hole deviation in soft to medium hard and fractured rock formations.
Concave Face
Be suitable for all application ground special for medium hard and homogeneous rock formations. Good hole deviation control and good flushing capacity.
Convex Face
Be suitable for soft to a medium-hard rock formation with low to medium air pressures. It is the most resistant to steel wash and may reduce the load and wear on the gauge buttons, high penetration rate but poor hole deviation control.
Flat Face
This kind of face shape is suitable
for very hard and abrasive rock formations in applications with high air pressures. Good penetration rates and resistance to steel body.
Double Gauge Face
This kind of face shape
is suitable for high-air-pressure drilling in medium to hard rock formations. Designed for high penetration drilling with good resistance on steel body.
DTH Bit Carbide Button Shape Options
Domed / Spherical Button
Domed /Spherical Buttons are usually used as gauge buttons of DTH Bits are suitable for very abrasive and very hard formations. Provide reasonable penetration rate in medium rock, hard rock, and hard rock broken formations, in all types of drilling.
Parabolic/Semi-Ballistic Buttons
Parabolic Buttons are usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations. Semi-Ballistic profiles have a balance between round and ballistic shapes and characteristics, making them a choice in medium rocks for better penetration rate and longer carbide life.
Ballistic Button
Ballistic Buttons are usually used as front buttons of DTH Bits, suitable for medium abrasive and medium hard formations.
They can also be used as gauge buttons if the rock is soft. Drill faster and have a more efficient rock breakage than rounded profile if used in soft and medium rocks
Sharp Ballistic Button
Sharp Buttons are usually used as front buttons of DTH bits for soft formations providing fast penetration rates and a low risk of button break.
Flat Button
Flat buttons are usually used as protection buttons against wear on surfaces of DTH Bits.
DTH Hammer Bits Specifications as below:










How to sharpen DTH Hammer Button Bit?
Step 1
Hard rock DTH drill bits have tungsten carbide “buttons” that become dull and flat during the drilling process. These buttons can be refurbished to extend the service life of the drill bit.
Step 2
To restore the tungsten carbide button back to “as new” condition, the grinding machine is used for bit sharpening. This semi-automatic machine uses grinding cups made of diamond-impregnated material that is concave in form to fit the button's design and size, such as round, spherical, ballistic etc. A recirculating coolant system suppresses any dust while cooling the carbide and grinding pin.
Step 3
The whole process can be repeated 5-6 times for each drill bit, which equates to significant cost savings for our customers.
More information for DTH Hammers Bits, please contact our experts:
Mobile / Whatsapp: +86 133 0602 8094
Email: [email protected]
1' DTH Hammer Bit
SKU#VDDB-001
Specs : Ø 57 mm - Ø 76 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
2' DTH Hammer Bit
SKU#VDDB-002
Specs : Ø 76 mm, Ø 80 mm, Ø 90 mm,
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
3' DTH Hammer Bit
SKU#VDDB-003
Specs : Ø 90 mm, Ø 100 mm, Ø 110 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
4' DTH Hammer Bit
SKU#VDDB-004
Specs : Ø 105mm, Ø 120 mm, Ø 130 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
5' DTH Hammer Bit
SKU#VDDB-005
Specs : Ø 130 mm, Ø 146 mm, Ø 156 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
6' DTH Hammer Bit
SKU#VDDB-006
Specs : Ø 152 mm, Ø 178 mm, Ø 203 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
7' and 8' DTH Hammer Bit
SKU#VDDB-007
Specs : Ø 200 mm, Ø 235 mm, Ø 279 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
9' and 10' DTH Hammer Bit
SKU#VDDB-008
Specs : Ø 254 mm, Ø 295 mm, Ø 330 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
12' DTH Hammer Bit
SKU#VDDB-008
Specs : Ø 305 mm, Ø 343 mm, Ø 381 mm,
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
15' DTH Hammer Bit
SKU#VDDB-009
Specs : Ø 381 mm, Ø 445 mm, Ø 508 mm
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
20' DTH Hammer Bit
SKU#VDDB-0010
Specs : Ø 483 mm, Ø 610 mm, Ø 660 mm,
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless
25' DTH Hammer Bit
SKU#VDDB-0011
Specs : Ø 610 mm, Ø 762 mm, Ø 914 mm,
Carbide Button Shape: Dome/Spherical, Semi-Ballistic, Ballistic, Sharp, Flat
Face Shape: Drop center, Concave, Convex, Flat, Double Gauge
With foot valve, Valveless