Dec 09, 2021
What is Rotary Drilling?
Rotary Drilling
In rotary drilling, the drill rig provides enough shaft pressure and rotary torque. The drill bit drills and rotates on the rock at the same time, which exerts both static and dynamic impact pressure on the rock. The drill bits rotate and grind continuously in the bottom of the hole to make the rock fracture. Compressed air under certain pressure and flow rate are sprayed from the nozzle through the inner of the drill pipe/drill tube, to make the slag continuously blown from the bottom of the hole along with the annular space between the drill pipe and the whole wall to the outside.
△Mainly suitable for large holes (coal, limestone) usually diameter larger than 200 mm.
△Drilling depths up to several thousand meters or even tens of kilometers.
△Adapted to soft and medium-hard rock.
△The slag flushing medium can be compressed air, air foam, mud, etc.
△Inefficient for hard rock drilling.
△Drilling straightness is lower than the down-the-hole (DTH) drilling type.
VD drill produced Rotary Drilling Bits size from 3 inches to 26 inches, Rotary tricone bits are manufactured using premium quality steel and use VD’s own tungsten carbide inserts that have been developed to suit the toughest applications.